diff --git a/INSTALL_SCRIPT.md b/INSTALL_SCRIPT.md
index 9eda17c..90017c9 100644
--- a/INSTALL_SCRIPT.md
+++ b/INSTALL_SCRIPT.md
@@ -2,12 +2,16 @@
 
 ## Overview
 
-This automated installation script (`install.sh`) simplifies the process of installing the AIC8800D80 WiFi driver on Linux systems.
+This automated installation script (`install.sh`) installs the AIC8800 Wi-Fi
+driver and firmware loader on Linux systems. Wi-Fi/Bluetooth combo adapters use
+the standard kernel `btusb` driver after firmware initialization.
 
 - Automatic Secure Boot detection
 - Automatic dependency installation
 - Automatic driver compilation and installation
 - Automatic module loading on boot
+- Automatic cleanup of obsolete `aic_btusb` configuration
+- Wi-Fi-only and Wi-Fi/Bluetooth combo adapter support from the same branch
 - Comprehensive error handling
 - Colored output and logging
 - Compatible with Ubuntu, Debian, Fedora, and derivatives (DKMS supported `dkms.conf`)
@@ -37,4 +41,4 @@ This script is used to diagnose build issues with the AIC8800D80 driver. Useful
 ```bash
 # Make the script executable and run it
 chmod +x diagnostic_build.sh && sudo ./diagnostic_build.sh
-```
\ No newline at end of file
+```
diff --git a/README.md b/README.md
index 0013efc..c12a507 100644
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-# AIC8800D80 Linux Driver
+# AIC8800 Linux Wi-Fi and Bluetooth Driver
 This driver is for the AIC8800D80 chipset, supported by devices such as the Tenda U11 and AX913B.
 
 > [!IMPORTANT]
@@ -20,7 +20,10 @@ Added support for devices with Vendor ID 368B (tested).
 
 Tested on Linux kernel 6.16 with Ubuntu 25.04 and 6.1.0.27 with Debian 12.
 
-> **Bluetooth Support**: The [`bluetooth`](https://github.com/shenmintao/aic8800d80/tree/bluetooth) branch fully supports Bluetooth. This main branch only provides Wi-Fi functionality. Please switch to the `bluetooth` branch if you need Bluetooth support.
+The same driver supports Wi-Fi-only adapters and Wi-Fi/Bluetooth combo
+adapters. On combo devices, `aic_load_fw` uploads the AIC firmware and the
+standard Linux `btusb` driver handles the Bluetooth HCI interface. The obsolete
+custom `aic_btusb` module is not used.
 
 ### Disclaimer
 I did not develop this software, The code is sourced from the Tenda U11 driver. I only made some modifications to the code to adapt it to newer kernel versions. Apart from compilation issues, I am unable to address other problems.
@@ -35,18 +38,18 @@ Before installing the driver, delete all aic8800-related folders under /lib/firm
 #### Method 2: Manual Installation
 
 #### Copy udev rules:
-Copy the aic.rules file to /lib/udev/rules.d/:
+Copy the aic.rules file to /usr/lib/udev/rules.d/:
 
 ```bash
-sudo cp aic.rules /lib/udev/rules.d/
+sudo cp aic.rules /usr/lib/udev/rules.d/
 ```
 
 #### Copy firmware:
 
-Copy the aic8800D80 folder from ./fw to /lib/firmware/:
+Copy the firmware directories from `./fw` to `/lib/firmware/`:
 
 ```bash
-sudo cp -r ./fw/aic8800D80 /lib/firmware/
+sudo cp -r ./fw/aic8800* /lib/firmware/
 ```
 #### Navigate to the driver directory:
 
@@ -113,3 +116,39 @@ If the device is still not active, check the kernel logs for any errors related
 sudo dmesg
 ```
 
+### Bluetooth on Combo Adapters
+
+Bluetooth support does not require a separate AIC transport module. After
+`aic_load_fw` initializes a combo adapter, the kernel automatically binds its
+Bluetooth interface to `btusb`. A Wi-Fi-only adapter does not expose that
+interface, so the Bluetooth path remains inactive.
+
+Verify the expected modules and controller with:
+
+```bash
+lsmod | grep -E 'aic_load_fw|aic8800_fdrv|btusb'
+lsusb -t
+bluetoothctl list
+```
+
+To scan after a controller appears:
+
+```bash
+bluetoothctl
+power on
+scan on
+```
+
+If Bluetooth is missing or reports HCI timeouts, run the read-only diagnostic
+script and attach its output together with the current boot log:
+
+```bash
+chmod +x diagnose_bt.sh
+sudo ./diagnose_bt.sh
+sudo journalctl -k -b --no-pager
+```
+
+The installer removes active references to the retired `aic_btusb` integration.
+It does not force-load `btusb` or globally change the Bluetooth rfkill state;
+normal kernel device matching and the user's system policy remain in control.
+
diff --git a/aic.rules b/aic.rules
index ac85c00..31820c3 100644
--- a/aic.rules
+++ b/aic.rules
@@ -1,3 +1,4 @@
+# AIC8800 USB mass-storage mode switch rules
 KERNEL=="sd*", ATTRS{idVendor}=="a69c", ATTRS{idProduct}=="5721",  SYMLINK+="aicudisk", RUN+="/usr/bin/eject /dev/%k"
 KERNEL=="sd*", ATTRS{idVendor}=="a69c", ATTRS{idProduct}=="5723",  SYMLINK+="tendaudisk", RUN+="/usr/bin/eject /dev/%k"
 KERNEL=="sd*", ATTRS{idVendor}=="a69c", ATTRS{idProduct}=="5724",  SYMLINK+="ugreenax900", RUN+="/usr/bin/eject /dev/%k"
@@ -7,3 +8,6 @@ KERNEL=="sd*", ATTRS{idVendor}=="a69c", ATTRS{idProduct}=="5727",  SYMLINK+="ten
 KERNEL=="sd*", ATTRS{idVendor}=="a69c", ATTRS{idProduct}=="572a",  SYMLINK+="tendaudiskv5", RUN+="/usr/bin/eject /dev/%k"
 KERNEL=="sd*", ATTRS{idVendor}=="a69c", ATTRS{idProduct}=="572c",  SYMLINK+="cudydiskv2", RUN+="/usr/bin/eject /dev/%k"
 KERNEL=="sd*", ATTRS{idVendor}=="a69c", ATTRS{idProduct}=="572f",  SYMLINK+="aicudisk572f", RUN+="/usr/bin/eject /dev/%k"
+
+# AIC8800D80 "Pandora" clone: switch 1111:1111 to its operational USB ID.
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="1111", ATTR{idProduct}=="1111", RUN+="/bin/sh -c 'if [ -x /usr/sbin/usb_modeswitch ]; then exec /usr/sbin/usb_modeswitch -c /etc/usb_modeswitch.d/1111:1111; elif [ -x /usr/bin/usb_modeswitch ]; then exec /usr/bin/usb_modeswitch -c /etc/usb_modeswitch.d/1111:1111; fi'"
diff --git a/bazzite/README.md b/bazzite/README.md
index 9b572b0..5d56e68 100644
--- a/bazzite/README.md
+++ b/bazzite/README.md
@@ -56,7 +56,9 @@ sudo rpm-ostree install "$rpm_path"
 sudo systemctl reboot
 ~~~
 
-After reboot, the Wi-Fi module and firmware loader will be available.
+After reboot, the Wi-Fi module and firmware loader will be available. On combo
+adapters, Bluetooth is handled by the standard `btusb` kernel module after
+firmware initialization.
 
 This RPM is built for the kernel reported by `uname -r`. Rebuild and reinstall
 it after a Bazzite kernel upgrade.
diff --git a/bazzite/aic8800d80.spec b/bazzite/aic8800d80.spec
index 62c6ec1..31ed88a 100644
--- a/bazzite/aic8800d80.spec
+++ b/bazzite/aic8800d80.spec
@@ -5,7 +5,7 @@
 Name:           aic8800d80
 Version:        %{shortcommit}
 Release:        1%{?dist}
-Summary:        AIC8800D80 USB Wi-Fi driver
+Summary:        AIC8800 USB Wi-Fi and Bluetooth firmware driver
 
 License:        GPL-2.0-only
 URL:            https://github.com/shenmintao/aic8800d80
@@ -22,9 +22,9 @@ Requires(post): /usr/sbin/depmod
 Requires(postun): /usr/sbin/depmod
 
 %description
-Out-of-tree AIC8800D80 USB Wi-Fi driver with udev mode-switch rules and all
-firmware variants shipped by the upstream repository. This main-branch package
-does not install a custom Bluetooth transport driver.
+Out-of-tree AIC8800 USB driver with Wi-Fi support, Bluetooth firmware loading,
+udev mode-switch rules, and all firmware variants shipped by the upstream
+repository. Combo adapters use the standard Linux btusb transport driver.
 
 %prep
 %autosetup -n %{name}-%{commit}
diff --git a/diagnose_bt.sh b/diagnose_bt.sh
new file mode 100644
index 0000000..c7ff142
--- /dev/null
+++ b/diagnose_bt.sh
@@ -0,0 +1,129 @@
+#!/bin/bash
+# Diagnose Bluetooth on AIC8800 Wi-Fi/Bluetooth combo adapters.
+#
+# aic_load_fw initializes the device and uploads the AIC firmware. The
+# standard in-kernel btusb driver must then bind to the Bluetooth HCI USB
+# interface. The removed aic_btusb module must not be installed or loaded.
+
+echo "=== AIC8800 Bluetooth diagnostics ==="
+echo ""
+
+echo "1. AIC USB devices:"
+if command -v lsusb >/dev/null 2>&1; then
+    lsusb | grep -iE 'a69c|368b|3625' || echo "   No known AIC USB ID found"
+else
+    echo "   lsusb is not installed"
+fi
+echo ""
+
+echo "2. USB interfaces and bound drivers:"
+bt_interface_found=false
+btusb_bound=false
+for dev in /sys/bus/usb/devices/*; do
+    [ -f "$dev/idVendor" ] || continue
+    [ -f "$dev/idProduct" ] || continue
+
+    vid=$(cat "$dev/idVendor" 2>/dev/null)
+    pid=$(cat "$dev/idProduct" 2>/dev/null)
+    case "$vid" in
+        a69c|368b|3625) ;;
+        *) continue ;;
+    esac
+
+    echo "   Device: $vid:$pid"
+    for intf in "$dev"/*:*; do
+        [ -d "$intf" ] || continue
+        class=$(cat "$intf/bInterfaceClass" 2>/dev/null)
+        subclass=$(cat "$intf/bInterfaceSubClass" 2>/dev/null)
+        protocol=$(cat "$intf/bInterfaceProtocol" 2>/dev/null)
+        driver=$(basename "$(readlink "$intf/driver" 2>/dev/null)" 2>/dev/null)
+        echo "     $(basename "$intf"): ${class:-??}/${subclass:-??}/${protocol:-??} -> ${driver:-unbound}"
+
+        if [ "$driver" = "btusb" ]; then
+            btusb_bound=true
+            bt_interface_found=true
+        elif [ "$class" = "e0" ] && [ "$subclass" = "01" ] && [ "$protocol" = "01" ]; then
+            bt_interface_found=true
+        fi
+    done
+done
+echo ""
+
+echo "3. Relevant kernel modules (combo expectation: aic_load_fw + btusb):"
+lsmod | grep -E '^(aic_load_fw|aic8800_fdrv|aic_btusb|btusb|bluetooth)[[:space:]]' || \
+    echo "   No related module is currently loaded"
+echo ""
+
+echo "4. Bluetooth controllers:"
+if command -v bluetoothctl >/dev/null 2>&1; then
+    bluetoothctl list 2>/dev/null || echo "   No controller reported by bluetoothctl"
+elif command -v hciconfig >/dev/null 2>&1; then
+    hciconfig -a 2>/dev/null || echo "   No controller reported by hciconfig"
+else
+    echo "   BlueZ command-line tools are not installed"
+fi
+echo ""
+
+echo "5. Firmware, btusb, and HCI log messages:"
+dmesg 2>/dev/null | grep -iE 'fw_patch|fw_adid|aicbt|bluetooth|btusb|hci' | tail -80 || true
+echo ""
+
+echo "6. Bluetooth rfkill state:"
+if command -v rfkill >/dev/null 2>&1; then
+    rfkill list bluetooth 2>/dev/null || echo "   No Bluetooth rfkill entry"
+else
+    echo "   rfkill is not installed"
+fi
+echo ""
+
+echo "7. Obsolete aic_btusb installation/configuration:"
+legacy_refs_found=false
+mapfile -t legacy_modprobe_files < <(
+    grep -RIlE '^[[:space:]]*(softdep|alias)[^#]*aic_btusb([[:space:]]|$)' \
+        /etc/modprobe.d /run/modprobe.d /usr/local/lib/modprobe.d \
+        /usr/lib/modprobe.d /lib/modprobe.d 2>/dev/null || true
+)
+mapfile -t legacy_udev_files < <(
+    grep -RIl 'aic_btusb/new_id' \
+        /etc/udev/rules.d /run/udev/rules.d \
+        /usr/lib/udev/rules.d /lib/udev/rules.d 2>/dev/null || true
+)
+
+for legacy_file in "${legacy_modprobe_files[@]}"; do
+    echo "   Obsolete modprobe directive: $legacy_file"
+    legacy_refs_found=true
+done
+for legacy_file in "${legacy_udev_files[@]}"; do
+    echo "   Obsolete udev binding rule: $legacy_file"
+    legacy_refs_found=true
+done
+if lsmod | awk '{print $1}' | grep -qx 'aic_btusb'; then
+    echo "   Obsolete aic_btusb module is loaded"
+    legacy_refs_found=true
+fi
+if modinfo -n aic_btusb >/dev/null 2>&1; then
+    echo "   Obsolete module file: $(modinfo -n aic_btusb 2>/dev/null)"
+    legacy_refs_found=true
+fi
+if [ "$legacy_refs_found" = false ]; then
+    echo "   No active aic_btusb module, directive, or binding rule found (expected)"
+fi
+echo ""
+
+echo "=== Assessment ==="
+if ! lsmod | awk '{print $1}' | grep -qx 'aic_load_fw'; then
+    echo "- aic_load_fw is not loaded; run: sudo modprobe aic8800_fdrv"
+fi
+if [ "$bt_interface_found" = true ] && [ "$btusb_bound" = false ]; then
+    echo "- A Bluetooth USB interface exists but is not bound to btusb."
+    echo "  Check for a btusb blacklist, then try: sudo modprobe btusb"
+fi
+if dmesg 2>/dev/null | grep -iE 'hci[0-9]+:.*(command|opcode|tx).*timed out|hci[0-9]+: link tx timeout' | tail -1 | grep -q .; then
+    echo "- HCI timeout detected. Confirm that aic_load_fw uploaded the firmware before btusb bound."
+    echo "  Also check for obsolete aic_btusb configuration above."
+fi
+if [ "$bt_interface_found" = false ]; then
+    echo "- No Bluetooth HCI USB interface was found. This is normal for a Wi-Fi-only adapter."
+fi
+
+echo "=== Diagnostics complete ==="
diff --git a/install.sh b/install.sh
index 4d82ae3..ce2a4f1 100755
--- a/install.sh
+++ b/install.sh
@@ -323,6 +323,46 @@ check_kernel_build_tree() {
 # Firmware Installation
 #############################################################################
 
+cleanup_legacy_bluetooth_config() {
+    local legacy_conf="/etc/modprobe.d/aic8800-bt.conf"
+    local legacy_udev="/etc/udev/rules.d/90-aic8800-mode-switch.rules"
+    local changed=false
+
+    if [ -f "$legacy_conf" ] && grep -Eq '^[[:space:]]*(softdep|alias)[^#]*aic_btusb([[:space:]]|$)' "$legacy_conf"; then
+        print_info "Removing obsolete aic_btusb directives from $legacy_conf..."
+        if [ ! -f "${legacy_conf}.aic8800-backup" ]; then
+            cp -a "$legacy_conf" "${legacy_conf}.aic8800-backup" >> "$LOG_FILE" 2>&1
+        fi
+        sed -i -E '/^[[:space:]]*(softdep|alias)[^#]*aic_btusb([[:space:]]|$)/d' "$legacy_conf"
+        if ! grep -Eq '^[[:space:]]*[^#[:space:]]' "$legacy_conf"; then
+            rm -f "$legacy_conf"
+        fi
+        changed=true
+    fi
+
+    if [ -f "$legacy_udev" ] && grep -q 'aic_btusb/new_id' "$legacy_udev"; then
+        print_info "Removing obsolete aic_btusb binding rules from $legacy_udev..."
+        if [ ! -f "${legacy_udev}.aic8800-backup" ]; then
+            cp -a "$legacy_udev" "${legacy_udev}.aic8800-backup" >> "$LOG_FILE" 2>&1
+        fi
+        sed -i '/aic_btusb\/new_id/d' "$legacy_udev"
+        changed=true
+    fi
+
+    if lsmod | awk '{print $1}' | grep -qx 'aic_btusb'; then
+        print_info "Unloading obsolete aic_btusb module..."
+        if modprobe -r aic_btusb >> "$LOG_FILE" 2>&1; then
+            changed=true
+        else
+            print_warning "aic_btusb is still in use; reboot or replug the adapter after installation."
+        fi
+    fi
+
+    if [ "$changed" = true ]; then
+        print_success "Legacy Bluetooth configuration cleaned up."
+    fi
+}
+
 install_firmware() {
     print_step "Installing firmware..."
 
@@ -334,6 +374,8 @@ install_firmware() {
         exit 1
     fi
 
+    cleanup_legacy_bluetooth_config
+
     # Remove old firmware versions
     if [ -d "/lib/firmware" ] && [ -n "$(find /lib/firmware -maxdepth 1 -name 'aic8800*' -type d 2>/dev/null)" ]; then
         print_info "Removing existing firmware..."
@@ -351,6 +393,8 @@ install_firmware() {
         fi
     done
 
+    print_success "Firmware installed for all supported chip variants."
+
     # Install udev rules
     local rules_source="${SCRIPT_DIR}/aic.rules"
     local rules_dest="/usr/lib/udev/rules.d/aic.rules"
@@ -526,22 +570,23 @@ refresh_initramfs() {
 #############################################################################
 
 load_module() {
-    print_step "Loading kernel module..."
+    print_step "Loading kernel modules..."
     
     # Update module dependencies
     print_info "Updating module dependencies..."
     depmod -a >> "$LOG_FILE" 2>&1
     
-    # Unload module if already loaded
     if lsmod | grep -q "$MODULE_NAME"; then
-        print_info "Module already loaded. Reloading..."
+        print_info "Wi-Fi module already loaded. Reloading..."
         modprobe -r "$MODULE_NAME" >> "$LOG_FILE" 2>&1 || true
     fi
     
-    # Load the module
+    # aic8800_fdrv depends on aic_load_fw, which initializes both Wi-Fi-only
+    # adapters and the Bluetooth firmware on combo adapters. If a standard HCI
+    # USB interface appears afterwards, the kernel USB modalias loads btusb.
     print_info "Loading $MODULE_NAME..."
     if modprobe "$MODULE_NAME" >> "$LOG_FILE" 2>&1; then
-        print_success "Module loaded successfully."
+        print_success "Wi-Fi module loaded successfully."
         
         # Verify module is loaded
         print_info "Waiting for module to initialize..."
@@ -555,15 +600,17 @@ load_module() {
         done
         
         if [ "$module_loaded" = true ]; then
-            print_success "Module is active in kernel."
+            print_success "Wi-Fi module is active in kernel."
         else
-            print_warning "Module may not be fully initialized yet."
+            print_warning "Wi-Fi module may not be fully initialized yet."
         fi
     else
-        print_warning "Module installed but could not be loaded immediately."
+        print_warning "Wi-Fi module installed but could not be loaded immediately."
         print_info "This may be due to Secure Boot or missing hardware."
         print_info "Try rebooting or check: sudo dmesg | grep aic8800"
     fi
+
+    print_info "Combo adapters use the standard btusb driver when their Bluetooth interface appears."
 }
 
 #############################################################################
@@ -583,14 +630,22 @@ verify_installation() {
         print_warning "DKMS status unclear: $dkms_status"
     fi
     
-    # Check if module is loaded
+    # Check if the Wi-Fi module is loaded
     if lsmod | grep -q "$MODULE_NAME"; then
-        print_success "Kernel module is loaded."
-        echo ""
-        lsmod | grep aic
+        print_success "Wi-Fi kernel module is loaded."
     else
-        print_info "Module not currently loaded (this is OK if no hardware is connected)."
+        print_info "Wi-Fi module not currently loaded (this is OK if no hardware is connected)."
     fi
+
+    if lsmod | awk '{print $1}' | grep -qx 'btusb' || compgen -G '/sys/class/bluetooth/hci*' > /dev/null; then
+        print_success "A Bluetooth controller or the standard btusb module is present."
+    else
+        print_info "No Bluetooth controller is present (normal for Wi-Fi-only adapters or when no combo adapter is connected)."
+    fi
+
+    echo ""
+    print_info "Loaded AIC modules:"
+    lsmod | grep aic || echo "  (none)"
     
     # Check firmware
     local fw_count=0
@@ -610,6 +665,15 @@ verify_installation() {
     if command -v iwconfig &> /dev/null; then
         iwconfig 2>/dev/null | grep -E "wlan|IEEE" || echo "No wireless interfaces detected (hardware may not be connected)"
     fi
+
+    print_info "Checking for Bluetooth interfaces on combo adapters..."
+    if command -v bluetoothctl &> /dev/null; then
+        bluetoothctl list 2>/dev/null || echo "No Bluetooth interfaces detected (normal for Wi-Fi-only adapters)"
+    elif command -v hciconfig &> /dev/null; then
+        hciconfig 2>/dev/null || echo "No Bluetooth interfaces detected (normal for Wi-Fi-only adapters)"
+    else
+        echo "Bluetooth tools not installed (install BlueZ to manage a combo adapter)"
+    fi
 }
 
 #############################################################################
@@ -624,13 +688,14 @@ show_final_instructions() {
     echo ""
     echo -e "${CYAN}Important Information:${NC}"
     echo ""
-    echo "✓ Driver installed via DKMS"
+    echo "✓ Wi-Fi driver and firmware loader installed via DKMS"
+    echo "✓ Combo adapters use the standard Linux btusb driver"
     echo "✓ Automatic rebuild enabled for kernel updates"
     echo "✓ Firmware installed in /lib/firmware/"
     echo ""
     echo -e "${CYAN}Next Steps:${NC}"
     echo ""
-    echo "1. Connect your AIC8800D80 USB WiFi adapter"
+    echo "1. Connect your AIC8800 USB Wi-Fi or Wi-Fi/Bluetooth adapter"
     echo ""
     echo "2. Check if the adapter is detected:"
     echo "   ${BLUE}lsusb | grep -i aic${NC}"
@@ -639,32 +704,36 @@ show_final_instructions() {
     echo ""
     echo "3. View kernel messages about the driver:"
     echo "   ${BLUE}sudo dmesg | grep aic8800${NC}"
+    echo "   ${BLUE}sudo dmesg | grep -iE 'bluetooth|btusb|hci'${NC}"
     echo ""
     echo "4. Connect to a WiFi network:"
     echo "   ${BLUE}nmcli device wifi list${NC}"
     echo "   ${BLUE}nmcli device wifi connect \"SSID\" password \"PASSWORD\"${NC}"
     echo ""
+    echo "5. For a combo adapter, check Bluetooth:"
+    echo "   ${BLUE}bluetoothctl list${NC}"
+    echo "   ${BLUE}bluetoothctl scan on${NC}"
+    echo ""
     echo -e "${CYAN}Troubleshooting:${NC}"
     echo ""
     echo "• Check DKMS status:"
     echo "  ${BLUE}dkms status${NC}"
     echo ""
     echo "• Check loaded modules:"
-    echo "  ${BLUE}lsmod | grep aic8800${NC}"
+    echo "  ${BLUE}lsmod | grep -E 'aic|btusb'${NC}"
     echo ""
-    echo "• Manually load the module:"
+    echo "• Manually load the Wi-Fi module and firmware loader:"
     echo "  ${BLUE}sudo modprobe aic8800_fdrv${NC}"
     echo ""
     echo "• View detailed logs:"
     echo "  ${BLUE}cat $LOG_FILE${NC}"
     echo ""
     echo -e "${YELLOW}Known Limitations:${NC}"
-    echo "• Bluetooth functionality is not supported"
     echo "• Secure Boot may prevent module loading (disable in BIOS if needed)"
     echo ""
     echo -e "${CYAN}Uninstallation:${NC}"
     echo "  ${BLUE}sudo dkms remove ${DRV_NAME}/${DRV_VERSION} --all${NC}"
-    echo "  ${BLUE}sudo rm -rf /lib/firmware/aic8800D80${NC}"
+    echo "  ${BLUE}sudo rm -rf /lib/firmware/aic8800*${NC}"
     echo ""
 }
 
diff --git a/tests/unified-wifi-bt/README.md b/tests/unified-wifi-bt/README.md
new file mode 100644
index 0000000..46bf4fd
--- /dev/null
+++ b/tests/unified-wifi-bt/README.md
@@ -0,0 +1,72 @@
+# Unified Wi-Fi and Bluetooth branch test
+
+This branch tests replacing the separate `main` and `bluetooth` branches with
+one driver and installer. The kernel driver, firmware, and DKMS configuration
+were already identical on both branches. This test unifies their installer,
+migration, diagnostics, packaging description, and documentation.
+
+The expected architecture is:
+
+- `aic_load_fw` initializes every supported adapter and uploads firmware.
+- `aic8800_fdrv` handles Wi-Fi.
+- A combo adapter exposes a Bluetooth HCI USB interface after initialization;
+  the standard Linux `btusb` driver binds through normal USB device matching.
+- A Wi-Fi-only adapter exposes no HCI interface and does not need `btusb`.
+- The retired custom `aic_btusb` module is never installed or used.
+
+The installer deliberately does not force-load `btusb` and does not globally
+unblock Bluetooth through rfkill.
+
+## Install
+
+```bash
+git fetch origin
+git switch test/unified-wifi-bt
+git pull --ff-only
+sudo ./install.sh
+sudo reboot
+```
+
+## Test a Wi-Fi-only adapter
+
+Confirm that:
+
+1. The Wi-Fi interface is created.
+2. Scanning, association, DHCP, and real traffic work.
+3. No `aic_btusb` module is loaded.
+4. The absence of `btusb` or an HCI controller is treated as normal.
+
+## Test a Wi-Fi/Bluetooth combo adapter
+
+Confirm that:
+
+1. Wi-Fi scanning, association, DHCP, and real traffic work.
+2. `aic_load_fw` uploads the firmware before the HCI interface is used.
+3. The Bluetooth USB interface is bound to the standard `btusb` driver.
+4. `bluetoothctl` can power on, scan, pair, and exchange real traffic.
+5. No `aic_btusb` module, alias, soft dependency, or udev binding rule remains.
+
+## Collect results
+
+```bash
+git rev-parse --short HEAD
+lsusb
+lsusb -t
+lsmod | grep -E 'aic|btusb|bluetooth'
+iw dev
+bluetoothctl list
+sudo ./diagnose_bt.sh | tee unified-wifi-bt-diagnostic.log
+sudo journalctl -k -b --no-pager | tee unified-wifi-bt-kernel.log
+```
+
+Please attach both logs and identify whether the tested adapter is Wi-Fi-only
+or a combo device.
+
+## Roll back during testing
+
+```bash
+git switch main
+git pull --ff-only
+sudo ./install.sh
+sudo reboot
+```