mirror of
https://github.com/shenmintao/aic8800d80.git
synced 2026-09-26 17:44:16 +00:00
docs: announce Bluetooth branch retirement
This commit is contained in:
@@ -10,7 +10,7 @@ This driver is for the AIC8800D80 chipset, supported by devices such as the Tend
|
|||||||
> to avoid the deterministic firmware upload timeout at `0x170400`. Use
|
> to avoid the deterministic firmware upload timeout at `0x170400`. Use
|
||||||
> `main` when `chip_mcu_id=0` or when the MCU revision is unknown.
|
> `main` when `chip_mcu_id=0` or when the MCU revision is unknown.
|
||||||
>
|
>
|
||||||
> Hardware revision takes precedence over the Bluetooth feature branch. MCU1
|
> Hardware revision takes precedence over the separate Bluetooth branch. MCU1
|
||||||
> devices should remain on `legacy-mcu1`, which initializes Bluetooth for the
|
> devices should remain on `legacy-mcu1`, which initializes Bluetooth for the
|
||||||
> kernel's standard `btusb` driver. After switching branches, rerun
|
> kernel's standard `btusb` driver. After switching branches, rerun
|
||||||
> `sudo ./install.sh` and reboot; switching the Git branch alone does not
|
> `sudo ./install.sh` and reboot; switching the Git branch alone does not
|
||||||
@@ -20,7 +20,16 @@ Added support for devices with Vendor ID 368B (tested).
|
|||||||
|
|
||||||
Tested on Linux kernel 6.16 with Ubuntu 25.04 and 6.1.0.27 with Debian 12.
|
Tested on Linux kernel 6.16 with Ubuntu 25.04 and 6.1.0.27 with Debian 12.
|
||||||
|
|
||||||
> **Bluetooth Support**: The [`bluetooth`](https://github.com/shenmintao/aic8800d80/tree/bluetooth) branch fully supports Bluetooth. This main branch only provides Wi-Fi functionality. Please switch to the `bluetooth` branch if you need Bluetooth support.
|
> [!NOTE]
|
||||||
|
> **Bluetooth branch retirement:** The separate
|
||||||
|
> [`bluetooth`](https://github.com/shenmintao/aic8800d80/tree/bluetooth) branch
|
||||||
|
> is deprecated and is being kept only during the migration period. Wi-Fi and
|
||||||
|
> standard-`btusb` Bluetooth support are being consolidated into `main` in
|
||||||
|
> [PR #73](https://github.com/shenmintao/aic8800d80/pull/73). After hardware
|
||||||
|
> validation and promotion, the `bluetooth` branch will be removed. Existing
|
||||||
|
> users may remain on it temporarily; new validation should use
|
||||||
|
> `test/unified-wifi-bt-zlp`. MCU1 hardware must use `legacy-mcu1`, not the
|
||||||
|
> separate `bluetooth` branch.
|
||||||
|
|
||||||
### Disclaimer
|
### Disclaimer
|
||||||
I did not develop this software, The code is sourced from the Tenda U11 driver. I only made some modifications to the code to adapt it to newer kernel versions. Apart from compilation issues, I am unable to address other problems.
|
I did not develop this software, The code is sourced from the Tenda U11 driver. I only made some modifications to the code to adapt it to newer kernel versions. Apart from compilation issues, I am unable to address other problems.
|
||||||
|
|||||||
Reference in New Issue
Block a user