docs: update README with full Bluetooth support documentation

README.md

@@ -5,7 +5,7 @@ Added support for devices with Vendor ID 368B (tested).
 
 Tested on Linux kernel 6.16 with Ubuntu 25.04 and 6.1.0.27 with Debian 12.
 
-Bluetooth not working.
+This branch (`bluetooth`) fully supports both **Wi-Fi** and **Bluetooth**.
 
 ### Disclaimer
 I did not develop this software, The code is sourced from the Tenda U11 driver. I only made some modifications to the code to adapt it to newer kernel versions. Apart from compilation issues, I am unable to address other problems.
@@ -97,3 +97,57 @@ If the device is still not active, check the kernel logs for any errors related
 ```bash
 sudo dmesg
 ```
+
+### Bluetooth Support
+
+The `aic_load_fw` module loads the Bluetooth firmware during initialization. After the firmware is correctly uploaded, the standard Linux `btusb` driver handles the Bluetooth interface — no custom `aic_btusb` module is needed (see [PR #35](https://github.com/shenmintao/aic8800d80/pull/35) for details).
+
+#### Verify Bluetooth is Working
+
+After loading the driver and plugging in the USB device, check if the Bluetooth HCI device is registered:
+
+```bash
+hciconfig -a
+```
+
+You should see an HCI device (e.g., `hci0`) listed. If the device is down, bring it up:
+
+```bash
+sudo hciconfig hci0 up
+```
+
+You can also use `bluetoothctl` to scan and connect to Bluetooth devices:
+
+```bash
+bluetoothctl
+# Inside bluetoothctl:
+power on
+scan on
+```
+
+#### Bluetooth Troubleshooting
+
+If Bluetooth is not working, run the diagnostic script:
+
+```bash
+chmod +x diagnose_bt.sh
+sudo ./diagnose_bt.sh
+```
+
+Common issues and solutions:
+
+1. **Firmware not found**: Ensure the firmware files are correctly copied to `/lib/firmware/aic8800D80/`. Key Bluetooth firmware files include:
+   - `fw_patch_8800d80_u02.bin`
+   - `fw_patch_table_8800d80_u02.bin`
+   - `fw_adid_8800d80_u02.bin`
+
+2. **Check kernel logs** for Bluetooth-related errors:
+   ```bash
+   sudo dmesg | grep -iE "aicbt|bluetooth|hci|fw_patch"
+   ```
+
+3. **RF-Kill blocking Bluetooth**:
+   ```bash
+   rfkill list bluetooth
+   sudo rfkill unblock bluetooth
+   ```

diagnose_bt.sh

@@ -0,0 +1,98 @@
+#!/bin/bash
+#
+# AIC8800D80 Bluetooth Diagnostic Script
+# 用于诊断蓝牙问题
+#
+
+echo "=== AIC8800D80 蓝牙诊断 ==="
+echo ""
+
+# 1. 检查 USB 设备
+echo "1. USB 设备状态:"
+echo "   当前 AIC 设备:"
+lsusb | grep -iE "a69c|368b|1111" || echo "   未找到 AIC 设备"
+echo ""
+
+# 2. 检查 USB 接口数量
+echo "2. USB 接口详情:"
+for dev in /sys/bus/usb/devices/*; do
+    if [ -f "$dev/idVendor" ] && [ -f "$dev/idProduct" ]; then
+        vid=$(cat "$dev/idVendor" 2>/dev/null)
+        pid=$(cat "$dev/idProduct" 2>/dev/null)
+        if [[ "$vid" == "a69c" || "$vid" == "368b" ]]; then
+            echo "   设备: $vid:$pid"
+            if [ -d "$dev" ]; then
+                for intf in "$dev"/*:*; do
+                    if [ -d "$intf" ]; then
+                        class=$(cat "$intf/bInterfaceClass" 2>/dev/null)
+                        subclass=$(cat "$intf/bInterfaceSubClass" 2>/dev/null)
+                        protocol=$(cat "$intf/bInterfaceProtocol" 2>/dev/null)
+                        driver=$(basename "$(readlink "$intf/driver" 2>/dev/null)" 2>/dev/null)
+                        echo "     接口: $class/$subclass/$protocol -> 驱动: ${driver:-未绑定}"
+                    fi
+                done
+            fi
+        fi
+    fi
+done
+echo ""
+
+# 3. 检查已加载的模块
+echo "3. 已加载的 AIC 模块:"
+lsmod | grep -E "aic|btusb" || echo "   未找到相关模块"
+echo ""
+
+# 4. 检查 HCI 设备
+echo "4. HCI 设备:"
+hciconfig -a 2>/dev/null || echo "   无法获取 HCI 信息 (可能需要 root 权限)"
+echo ""
+
+# 5. 检查蓝牙固件加载日志
+echo "5. 蓝牙固件加载日志 (最近 50 行):"
+dmesg | grep -iE "fw_patch|fw_adid|aicbt|bluetooth|btusb|aic_btusb|hci" | tail -50
+echo ""
+
+# 6. 检查 rfkill 状态
+echo "6. RF-Kill 状态:"
+rfkill list bluetooth 2>/dev/null || echo "   无法获取 rfkill 信息"
+echo ""
+
+# 7. 检查 modprobe 配置
+echo "7. Modprobe 配置:"
+if [ -f /etc/modprobe.d/aic8800-bt.conf ]; then
+    echo "   /etc/modprobe.d/aic8800-bt.conf 存在:"
+    cat /etc/modprobe.d/aic8800-bt.conf
+else
+    echo "   /etc/modprobe.d/aic8800-bt.conf 不存在!"
+fi
+echo ""
+
+# 8. 建议
+echo "=== 诊断建议 ==="
+echo ""
+
+# 检查是否有 3 个接口
+intf_count=$(lsusb -t 2>/dev/null | grep -c "Class=Wireless" || echo "0")
+if [ "$intf_count" -lt 2 ]; then
+    echo "⚠️  蓝牙接口数量不足 (应该有 2 个 Wireless 接口)"
+    echo "   可能原因: aic_load_fw 没有加载蓝牙固件"
+    echo "   解决方案: 检查 dmesg 中是否有 'fw_patch_table_8800d80' 相关日志"
+    echo ""
+fi
+
+# 检查 btusb 是否抢占
+if lsmod | grep -q "^btusb"; then
+    echo "⚠️  btusb 模块已加载"
+    echo "   如果蓝牙不工作，可能是 btusb 抢占了设备"
+    echo "   解决方案: sudo rmmod btusb && sudo modprobe aic_btusb"
+    echo ""
+fi
+
+# 检查 aic_btusb 是否加载
+if ! lsmod | grep -q "aic_btusb"; then
+    echo "⚠️  aic_btusb 模块未加载"
+    echo "   解决方案: sudo modprobe aic_btusb"
+    echo ""
+fi
+
+echo "=== 诊断完成 ==="