docs: announce Bluetooth branch retirement

This commit is contained in:
Shen Mintao
2026-07-25 16:04:38 +08:00
parent 4b31d02392
commit 0d7a07e8aa
+11 -2
View File
@@ -10,7 +10,7 @@ This driver is for the AIC8800D80 chipset, supported by devices such as the Tend
> to avoid the deterministic firmware upload timeout at `0x170400`. Use > to avoid the deterministic firmware upload timeout at `0x170400`. Use
> `main` when `chip_mcu_id=0` or when the MCU revision is unknown. > `main` when `chip_mcu_id=0` or when the MCU revision is unknown.
> >
> Hardware revision takes precedence over the Bluetooth feature branch. MCU1 > Hardware revision takes precedence over the separate Bluetooth branch. MCU1
> devices should remain on `legacy-mcu1`, which initializes Bluetooth for the > devices should remain on `legacy-mcu1`, which initializes Bluetooth for the
> kernel's standard `btusb` driver. After switching branches, rerun > kernel's standard `btusb` driver. After switching branches, rerun
> `sudo ./install.sh` and reboot; switching the Git branch alone does not > `sudo ./install.sh` and reboot; switching the Git branch alone does not
@@ -20,7 +20,16 @@ Added support for devices with Vendor ID 368B (tested).
Tested on Linux kernel 6.16 with Ubuntu 25.04 and 6.1.0.27 with Debian 12. Tested on Linux kernel 6.16 with Ubuntu 25.04 and 6.1.0.27 with Debian 12.
> **Bluetooth Support**: The [`bluetooth`](https://github.com/shenmintao/aic8800d80/tree/bluetooth) branch fully supports Bluetooth. This main branch only provides Wi-Fi functionality. Please switch to the `bluetooth` branch if you need Bluetooth support. > [!NOTE]
> **Bluetooth branch retirement:** The separate
> [`bluetooth`](https://github.com/shenmintao/aic8800d80/tree/bluetooth) branch
> is deprecated and is being kept only during the migration period. Wi-Fi and
> standard-`btusb` Bluetooth support are being consolidated into `main` in
> [PR #73](https://github.com/shenmintao/aic8800d80/pull/73). After hardware
> validation and promotion, the `bluetooth` branch will be removed. Existing
> users may remain on it temporarily; new validation should use
> `test/unified-wifi-bt-zlp`. MCU1 hardware must use `legacy-mcu1`, not the
> separate `bluetooth` branch.
### Disclaimer ### Disclaimer
I did not develop this software, The code is sourced from the Tenda U11 driver. I only made some modifications to the code to adapt it to newer kernel versions. Apart from compilation issues, I am unable to address other problems. I did not develop this software, The code is sourced from the Tenda U11 driver. I only made some modifications to the code to adapt it to newer kernel versions. Apart from compilation issues, I am unable to address other problems.