aic8800d80/tests/issue63-zlp-quirk

Issue #63: standard btusb ZLP companion-module test

This experiment keeps the normal aic_load_fw + system btusb architecture. It does not install or bind the vendor aic_btusb transport, and it does not replace the distribution's btusb.ko.

The underlying ZLP behavior was confirmed in issue #63: AAC playback that previously stalled after about one minute remained stable for more than one hour with the standard btusb ZLP patch, including after the obsolete aic_btusb module was removed.

The small aic_zlp_quirk.ko module first tries to attach a kretprobe to the standard btusb function that allocates Bluetooth ACL bulk OUT URBs. The target is module-qualified as btusb:alloc_bulk_urb, avoiding similarly named symbols in unrelated USB drivers.

Some distribution builds inline that private btusb function. When the preferred hook is unavailable, the same module falls back to the stable usb_submit_urb entry point. The fallback requires all of the following before changing an URB:

• USB device 368b:8d81;
• bulk OUT transfer;
• endpoint declared by Bluetooth interface 0 (e0/01/01).

Both paths add URB_ZERO_PACKET before the USB core submits the transfer. The Wi-Fi interface and unrelated USB devices are left unchanged.

The hook fails closed: if neither probe can be installed or kprobes are disabled, the companion module refuses to load and the system btusb remains unchanged.

Before installing

First remove the earlier patched-btusb diagnostic build, if installed:

cd ../issue63-btusb-zlp
sudo ./btusb-zlp-test.sh remove

An obsolete aic_btusb installation must also be unloaded and removed before this test. Verify that the AIC Bluetooth interfaces use the system driver:

lsusb -t
lsmod | grep -E '^(btusb|aic_btusb)\b'

Install

Install the normal build dependencies. For Fedora:

sudo dnf install dkms gcc make kernel-devel-$(uname -r)

Then install and load the companion module:

cd tests/issue63-zlp-quirk
sudo ./aic-zlp-quirk-test.sh install
./aic-zlp-quirk-test.sh status

Expected status includes:

quirk loaded:  yes
active hook:   btusb:alloc_bulk_urb
legacy aic_btusb: not loaded
AIC BT driver: btusb

active hook: usb_submit_urb is also valid when the distribution compiler inlined the preferred private btusb function.

Select AAC and play audio for at least one hour:

bluetoothctl scan off
pactl set-card-profile bluez_card.28_6F_40_46_AB_B1 a2dp-sink-aac

While audio is playing, the ZLP injections counter should increase:

./aic-zlp-quirk-test.sh status
sudo dmesg | grep -i aic_zlp_quirk

Remove

sudo ./aic-zlp-quirk-test.sh remove
./aic-zlp-quirk-test.sh status

Removal unloads only aic_zlp_quirk.ko. The distribution btusb.ko was never overwritten and remains the Bluetooth transport throughout the test.

Kernel requirements

• matching kernel headers;
• CONFIG_KPROBES=y and kretprobe support;
• standard btusb plus either its alloc_bulk_urb symbol or the USB core usb_submit_urb symbol;
• a valid module signature when Secure Boot policy requires one.

The alloc_bulk_urb function is present with the same signature in Linux 5.15, 6.1, 6.6, 6.12, 6.18, and 7.1.3, although compilers may inline it. The fallback avoids depending on that implementation detail. DKMS compiles a separate binary for each installed kernel while the repository maintains one small source file.